Welding CBN Inserts
There are two categories: PCBN sintered directly from CBN single crystal and PCBN sintered body with a certain proportion of bindersuch as CO, Ni and Al.
With standard sizes available
OEM accepted
Welding CBN Inserts made by the material Cubic boron nitride with high hardness, good thermal stability and strong bonding resistance suitable for processing high-manganese steel, tool steel, bearing steel, high-chromium alloy, gray cast iron, HT250 and so on. Sandwich CBN insert allows multiple corners or double full face negative inserts with a very strong high temperature vacuum braze. It provides higher insert integrity and lower cost per corner.
Advantages:
1. Resists tribooxidation, adhesion, or diffusion.
2. Increases wear resistance and dissipates heat from the cutting edge more efficiently thus drastically improving tool life and surface finish.
3. Compressive strength and toughness for hard turning with continuous to extremely interrupted cut.
4. Super fine grain, very high wear resistance, compressive strength and toughness for hard turning with continuous cut.
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
.jpg)
.jpg?imageView2/1/w/80/h/66)